Left Banner

Most View Product

Most View Product

Approved baby weighing scale ADE M118000
  • New

Approved baby weighing...

€456.00
Circulating thermostat KRÜSS PT80
  • New

Circulating thermostat...

€1,790.00
All products

Moisture analysers

Moisture analysers

Active filters

KERN DAB 100-3 Moisture analyser
  • -10%
  • New
KERN & SOHN GmbH KERN DAB 100-3 Moisture analyser

Moisture analyser with user-friendly graphics display and 15 memories for drying programs

Adjusting program (CAL): For quick setting of the balance's accuracy. External adjusting weight required. Memory: Balance contains memories, e.g. for tare weights, weighing data, item data, PLU etc. Data interface RS-232: To connect the balance to a printer, PC or network GLP/ISO log: with weight, date and time. Only with KERN printers, see Accessories Weighing units: Can be switched to e.g. nonmetric units at the touch of a key. See balance model. Mains part: mains part integrated in the balance. 230V/50Hz Standard type D, if requested also available in standard GB, AUS or USA. Strain gauge: An electrical resistor strip that is glued to an elastic deforming body made of aluminium. As the strain gauge is mechanically deformed its resistance value changes, allowing the measured value to be calculated. 3 years warranty

TECHNICAL DATA

Weighing capacity [Max] 110 g
Readability [d] 0,001 g
Weighing system Strain gauge
Temperature [Min] (°C) 40 °C
Temperature [Max] (°C) 199 °C
Stabilization time 3 s
Units g, % Humidity, % Dry mass
Reproducibility 0,001 g
Linearity ± 0,003 g
Readability moisture [d] (%) 0,01%
Drying modes Standard drying, Rapid drying, Gentle drying
Switch-off criteria time controlled, automatic, manual
Input voltage device / power [Max] 230 V AC, 50 Hz
Product group Moisture analyser
€1,125.00 Regular price €1,250.00
KERN DAB 200-2 Moisture analyser
  • -10%
  • New
KERN & SOHN GmbH KERN DAB 200-2 Moisture analyser

Moisture analyser with user-friendly graphics display and 15 memories for drying programs

Adjusting program (CAL): For quick setting of the balance's accuracy. External adjusting weight required. Memory: Balance contains memories, e.g. for tare weights, weighing data, item data, PLU etc. Data interface RS-232: To connect the balance to a printer, PC or network GLP/ISO log: with weight, date and time. Only with KERN printers, see Accessories Weighing units: Can be switched to e.g. nonmetric units at the touch of a key. See balance model. Mains part: mains part integrated in the balance. 230V/50Hz Standard type D, if requested also available in standard GB, AUS or USA. Strain gauge: An electrical resistor strip that is glued to an elastic deforming body made of aluminium. As the strain gauge is mechanically deformed its resistance value changes, allowing the measured value to be calculated. 3 years warranty

TECHNICAL DATA

Weighing capacity [Max] 200 g
Readability [d] 0,01 g
Weighing system Strain gauge
Temperature [Min] (°C) 40 °C
Temperature [Max] (°C) 199 °C
Stabilization time 3 s
Units g, % Humidity, % Dry mass
Reproducibility 0,01 g
Linearity ± 0,03 g
Readability moisture [d] (%) 0,05%
Drying modes Standard drying, Rapid drying, Gentle drying
Switch-off criteria time controlled, automatic, manual
Input voltage device / power [Max] 230 V AC, 50 Hz
Product group Moisture analyser
€1,080.00 Regular price €1,200.00
KERN DBS 60-3 Moisture analyser
  • New
KERN & SOHN GmbH KERN DBS 60-3 Moisture analyser

Adjusting program (CAL): For quick setting of the balance's accuracy. External adjusting weight required. Memory: Balance contains memories, e.g. for tare weights, weighing data, item data, PLU etc. Data interface RS-232: To connect the balance to a printer, PC or network GLP/ISO log: the balance displays the weight, date and time, regardless of printer connected Weighing units: Can be switched to e.g. nonmetric units at the touch of a key. See balance model. Mains part: mains part integrated in the balance. 230V/50Hz Standard type D, if requested also available in standard GB, AUS or USA. Weighing principle: Electromagnetic force compensation: Coil inside a permanent magnet. For the most accurate weighings

TECHNICAL DATA

Weighing capacity [Max] 60 g
Readability [d] 0,001 g
Weighing system Single-Cell
Temperature [Min] (°C) 50 °C
Temperature [Max] (°C) 200 °C
Stabilization time 3 s
Units g, % Humidity, % Dry mass, % ATRO
Reproducibility 0,001 g
Linearity ± 0,003 g
Readability moisture [d] (%) 0,01%
Drying modes Standard drying, Rapid drying, Gentle drying, Drying in levels
Switch-off criteria time controlled, automatic, manual
Product group Moisture analyser
€1,575.00
KERN DLB 160-3A Moisture analyser
  • New
KERN & SOHN GmbH KERN DLB 160-3A Moisture analyser

Adjusting program (CAL): For quick setting of the balance's accuracy. External adjusting weight required. Memory: Balance contains memories, e.g. for tare weights, weighing data, item data, PLU etc. Data interface RS-232: To connect the balance to a printer, PC or network GLP/ISO log: with weight, date and time. Only with KERN printers, see Accessories Weighing units: Can be switched to e.g. nonmetric units at the touch of a key. See balance model. Mains adapter: 230V/50Hz in standard version for Germany. On request GB or USA version. Strain gauge: An electrical resistor strip that is glued to an elastic deforming body made of aluminium. As the strain gauge is mechanically deformed its resistance value changes, allowing

TECHNICAL DATA

Weighing capacity [Max] 160 g
Readability [d] 0,001 g
Weighing system Strain gauge
Temperature [Min] (°C) 35 °C
Temperature [Max] (°C) 160 °C
Stabilization time 4 s
Units g, mg, % rH, % Dry mass
Reproducibility 0,001 g
Linearity ± 0,003 g
Readability moisture [d] (%) 0,01%
Drying modes Standard drying, Rapid drying
Switch-off criteria time controlled, automatic, manual
Product group Moisture analyser
€1,485.00
KERN DLB 160-3A Moisture analyser 110V
  • New
KERN & SOHN GmbH KERN DLB 160-3A Moisture analyser 110V

Adjusting program (CAL): For quick setting of the balance's accuracy. External adjusting weight required. Memory: Balance contains memories, e.g. for tare weights, weighing data, item data, PLU etc. Data interface RS-232: To connect the balance to a printer, PC or network GLP/ISO log: with weight, date and time. Only with KERN printers, see Accessories Weighing units: Can be switched to e.g. nonmetric units at the touch of a key. See balance model. Strain gauge: An electrical resistor strip that is glued to an elastic deforming body made of aluminium. As the strain gauge is mechanically deformed its resistance value changes, allowing

TECHNICAL DATA

Weighing capacity [Max] 160 g
Readability [d] 0,001 g
Weighing system Strain gauge
Temperature [Min] (°C) 35 °C
Temperature [Max] (°C) 160 °C
Stabilization time 4 s
Units g, mg, % rH, % Dry mass
Reproducibility 0,001 g
Linearity ± 0,003 g
Readability moisture [d] (%) 0,01%
Drying modes Standard drying, Rapid drying
Switch-off criteria time controlled, automatic, manual
Input voltage device / power [Max] 110 V; 50/60 Hz
Product group Moisture analyser
€1,485.00